================================================================== NOTES ON Installing D-Link DFE-650 Fast Ethernet PC Card For NetWare Server 3.12 Driver Users ================================================================== (c) 1999 Copyright D-Link Corporation ALL RIGHTS RESERVED This document contains DFE-650 Fast Ethernet PC Card installation notes, which is not included in the DFE-650 Fast Ethernet PC Card USER'S GUIDE or onscreen instructions, for NetWare Server 3.12 Driver users. This document contains information on the following topics: 1.0 Overview 2.0 Installation notes for NetWare Server 3.12 Driver users ___________________________________________________________________ 1.0 Overview ------------ Please also refer to the INST_DOS.TXT file on the DFE-650 Installation disk. 2.0 Installation Note for NetWare Server 3.12 Driver users ------------------------------------------------------------ ****************************************************************** * Notes: The PC Card should be enabled by Card service. * * Please run DFCD.EXE before starting the server. * * * * Content of CONFIG.SYS * * --------------------- * * Add below item to the CONFIG.SYS * * * * DEVICE=\DFCD.EXE /iop=300 /irq=11 * * ; is a directory include DFCD.EXE file. * * ; Please refer to the INST_DOS.TXT for details. * ****************************************************************** Modifying an existing NetWare 3.12 Server ----------------------------------------- 1. Please insert release driver diskette into disk drive. 2. Copy all provided NLM and LAN files into your DOS directory which will include the SERVER.EXE file. >COPY \*.LAN C:\ Example: >COPY A:\NETWARE\32BITLAN\*.LAN C:\SRV312 here is the directory where DFE650.LAN reside. 3. Start the NetWare Server. > CD \SRV312 > SERVER 4. From the Novell Server side, execute "LOAD INSTALL". By typing :LOAD INSTALL Select Select 5. Add the item below into the server's AUTOEXEC.NCF file. LOAD C:\SRV312\NBI31X.NLM LOAD C:\SRV312\MSM31X.NLM LOAD C:\SRV312\ETHERTSM.NLM LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_802.3 NAME=DFE650_1_E83 BIND IPX DFE650_1_E83 NET=xxxx LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_802.2 NAME=DFE650_1_E82 BIND IPX DFE650_1_E82 NET=xxxx LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_II NAME=DFE650_1_EII BIND IPX DFE650_1_EII NET=xxxx LOAD C:\SRV312\DFE650 SLOT=1 FRAME=Ethernet_SNAP NAME=DFE650_1_ESP BIND IPX DFE650_1_ESP NET=xxxx 6. Restart the server. ****************************************************************** * Notes: The PC Card should be enabled by Card service. * * Please run DFCD.EXE before start server. * * * * > DFCD /iop=300 /irq=11 * ****************************************************************** 3.0 Keywords supported by DFE650 ---------------------------------- TP - This keyword specifies that the UTP port on the adapter. TP_FULL_DUPLEX - This keyword selects twisted pair connection to work in full duplex mode. LINE_SPEED - This keyword selects line speed between 10Mbps and 100Mbps on network cards. Allowed values are: 10,100