==================================================================
NOTES ON
Installing D-Link DFE-650 Fast Ethernet PC Card
For Personal Netware Users
==================================================================
    (c) 1999 Copyright D-Link Corporation  ALL RIGHTS RESERVED



This document contains DFE-650 Fast Ethernet PC Card installation notes,
which is not included in the DFE-650 Fast Ethernet PC Card USER'S GUIDE
or onscreen instructions, for Personal Netware users.



This document contains information on the following topics:

1.0   Overview
2.0   Installation Notes

__________________________________________________________



 1.0   Overview
 --------------

        This ODI driver supports the Port, Node Address, Protocol and
        Frame options for creating your own NET.CFG file. For more
        information on these keywords, please refer to Novell's
        "NetWare ODI shell for DOS - NET.CFG options".

        Please also refer to the INST_DOS.TXT file for more information.


 2.0   Installation Notes
 ------------------------

       The NOVELL Personal NetWare installation diskettes are needed to
       complete this installation.

        1. Follow the normal installation procedure as described by
           Personal Netware.
        2. It will prompt you for a network driver.  Choose "Other
           Network support driver".
        3. It will request a path for the drivers. Respond with the
           path of the ODI DOS driver, .INS file, and NET.CFG sample
           installed with this readme.
        4. After completion of the installation procedure, modify the
           following lines in your STARTNET.BAT file from:

                LSL
                NE2000
                IPXODI A
                CLIENT
        to:
                LSL
                DFE650
                IPXODI A
                CLIENT

        5. Append the <PATH>\NET.CFG file to the NWCLIENT directory.
           This directory was created when you installed Personal
           NetWare .  <PATH> is the directory where NET.CFG resides.

        6. Run STARTNET to access the Novell network.