================================================================== NOTES ON Installing D-Link DFE-650 Fast Ethernet PC Card For SUN PC-NFS V5.0 Users ================================================================== (c) 1999 Copyright D-Link Corporation ALL RIGHTS RESERVED This document contains installation notes, which is not included in the DFE-650 Fast Ethernet PC Card USER'S GUIDE or onscreen instructions, for SUN PC-NFS V5.0 users regarding DFE-650 Fast Ethernet PC Card installation. This document contains information on the following topics: 1.0 Introduction 2.0 Installation Notes ___________________________________________________________________ 1.0 Introduction ---------------- SUN PC-NFS V5.0 users please also refer to the following: ------------------------------------------------------------------- File Description/Installation notes ------------------------------------------------------------------- \PKTDRV\README.TXT For all Packet driver users 2.0 Installation Notes --------------------------- If user prefers to use ODI MLID driver , please refer to the \NETWARE\PCNFS.TXT. If user prefers to use NDIS driver , please refer to the \NDIS\PCNFS.TXT. Packet Driver --------------------- When using PC-NFS independently, select the "OTHER" option from the PC-NFS installation screen. This option works with the PACKET driver included in the provided driver diskette. Copy the files listed below into the \NFS directory of your hard disk. These files will be used in the installation. File Description ------------ ------------------------------------- PDNFS.SYS PC-NFS driver program DFE650PD.SYS Packet driver program The following lists the contents of the configuration files: CONFIG.SYS AUTOEXEC.BAT ------------------ ------------------------ SWITCHES=/F SET TZ=EST5EDT DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE DEVICE=C:\EMM386.EXE NOEMS X=D000-D7FF @PROMPT $p$g DOS=HIGH,UMB PATH=C:\NFS;C:\DOS; BUFFERS=10,0 SET TEMP=C:\DOS FILES=40 SET NFSDRIVE=C STACKS=0,0 SET NFSPATH=C:\NFS LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET SHELL=C:\DOS\COMMAND.COM C:\DOS /P C:\NFS\PRT * DEVICE=C:\NFS\PCNFS.SYS /l40 C:\NFS\NET INIT DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\DFE650PD.SYS DEVICE=C:\NFS\PDNFS.SYS