================================================================
NOTES ON
Installing D-Link DFE-650 Fast Ethernet PC Card
For FTP PC/TCP Users
================================================================
    (c) 1999 Copyright D-Link Corporation  ALL RIGHTS RESERVED


This document contains installation notes, which is not included in the
DFE-650 Fast Ethernet PC Card USER'S GUIDE or onscreen instructions,
for FTP PC/TCP users regarding DFE-650 Fast Ethernet PC Card
installation.

This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes
___________________________________________________________________


1.0 Introduction
--------------------

FTP PC/TCP users please also refer to the following:

    -------------------------------------------------------------------
     File                     Description/Installation notes
    -------------------------------------------------------------------
    \PKTDRV\README.TXT        For all Packet driver  users


 2.0 Installation Notes
---------------------------

     1. Two methods available for run DFE-650 Fast Ethernet PC Card
        driver.

        Method 1
             in your CONFIG.SYS file, include the DFE650PD command.

                                 Format:
             DEVICE = DFE650PD.SYS [/option] <packet_int_no>

        Please refer to  the \PKTDRV\README.TXT file and INST_DOS.TXT
        file for more information.

        Method 2
             Issue DFE650PD command at the DOS command prompt.

                                Format:
             DFE650PD [/option] <packet_int_no>

        Please refer to  the \PKTDRV\README.TXT file and INST_DOS.TXT
        file for more information.


     2. Run the ETHDRV.EXE and IDRIVE.EXE device driver programs.
        These programs are provided by FTP.

     FTP's PC/TCP and associated programs are ready to used.